Peugeot 406 2.0 16v 132
Engine Remapping in Bedford
Peugeot 406 2.0 16v 132 in Bedford. Standard and remapped figures for this exact engine.
- Fully dyno tested remaps
- 30 day money back guarantee
- Lifetime software warranty
- UK-wide local network
Remap stats
Peugeot 406 2.0 16v 132: standard vs remapped
Petrol engine. Indicative stage 1 figures, fully dyno tested.
Power
+23 bhp · +17%- Standard132 bhp
- Remapped155 bhp
Torque
+35 Nm · +18%- Standard190 Nm
- Remapped225 Nm
Tuning figures are indicative estimates, not guaranteed results. Actual results depend on the condition of the vehicle.
Prices from £130
Fully dyno tested | 30 day money back guarantee | Lifetime software warranty
Out of the box the Peugeot 406 2.0 16v 132 gives 132 bhp and 190 Nm. Remapped in Bedford, we record 155 bhp and 225 Nm, so 23 bhp and 35 Nm more, or 17% and 18% respectively.
These are indicative figures for a petrol Peugeot 406 in good health. Your own results depend on the condition of the car.
Peugeot 406 2.0 16v 132 remap figures
- Fuel: Petrol
- Standard power: 132 bhp, remapped: 155 bhp (+23 bhp, +17%)
- Standard torque: 190 Nm, remapped: 225 Nm (+35 Nm, +18%)
- Service: stage 1 ECU remap, fully dyno tested
Petrol Peugeot 406: what changes with a remap
Petrol engines are remapped by refining fuelling, ignition timing and, on turbocharged engines, boost control. Done carefully this releases performance the manufacturer left in reserve, giving sharper throttle response and a stronger top end.
How the Peugeot 406 2.0 16v 132 compares
Ranked by power gain against the other petrol 406 engines (7 in total), the 2.0 16v 132 is 5th, 1 bhp below the 406 petrol average of 24 bhp.
Across our whole catalogue the average petrol remap adds 27 bhp and 51 Nm, so this engine's 23 bhp and 35 Nm sits below that benchmark.
Book vehicle tuning for your Peugeot 406 in Bedford
Based around Bedford, our team serves local drivers as part of the nationwide Remap Experts network. We regularly work with drivers in High Wycombe, Stevenage, Milton Keynes, Leighton Buzzard and Hemel Hempstead and nearby areas of the East of England.
All our remaps are fully dyno tested, backed by a 30 day money back guarantee and covered by a lifetime software warranty. Request a quote online or call 0800 779 7864.
If you are closer to Luton, Milton Keynes and Cambridge, those neighbouring Remap Experts sites can help too.
Ready for engine remapping on your Peugeot 406 in Bedford?
Send your details and a specialist will confirm what is possible for your engine.
Included
What we can do for your Peugeot 406
Stage 1 ECU remap
Add power and torque and improve driveability. Software only, tailored to your engine.
ECU repair and testing
Is your engine control unit playing up? We can arrange testing and repair, and source replacement ECUs.
DPF and EGR fault repair
Persistent DPF or EGR errors diagnosed and resolved in accordance with all current road-legal standards.
Engine carbon cleaning
Fault finding and carbon cleaning for the inside of your engine, typically completed in a couple of hours.
Same model
Other 406 engines
From quote to remapped in four steps
No jargon and no pressure. Here is exactly what happens.
- 01
Find your vehicle
Choose your make, model and engine to see the standard and remapped power and torque for your car.
- 02
Request a quote
Send your details and we contact you by SMS or call back with a quote. No obligation.
- 03
Book with your local site
Your local Remap Experts site arranges the remap and answers any questions about your car.
- 04
Remapped and dyno tested
Your remap is fully dyno tested, with a 30 day money back guarantee and a lifetime software warranty.
Everything you need to know
Plain-English guides to how remapping works, what it does and what to check first.
- 6 min read
What is ECU remapping?
The engine control unit, what a remap changes, and who it suits.
Read guide - 5 min read
The benefits of ECU remapping
More torque, better driveability and the potential for better economy.
Read guide - 6 min read
How ECU remapping works, step by step
From reading the original software to the dyno test.
Read guide